eSUN PLA+ Filament 2.85 mm 1kg (2.2lb) – INTSERVO 3D Printing Store

Note: Sealed bag only means a good sealed spool will be shipped without the product box or with a damaged product boxAdvanced formula.  Superior than all PLA on market. The newly added mixes are also bio-polyesters and the the PLA+ is still 100% biodegradeable. Major differences between PLA+ and regular PLA: Elongation At Break:  PLA+ 29%   Regular PLA 5% Izod Impact Strength:  PLA+ 7KJ/m2    Regular PLA 4.2KJ/m2 As you can see the Toughness of PLA+ is superior than regular PLA. Colors available: Black, Cool White, Warm White, Red, Blue, Brown, Gray, Peak Green, Magenta, Yellow, Skin, Pink, Orange, Gold, Silver, Pine Green, Light Blue, Purple Characteristics Added extra bio-polyesters blends. Still 100% bio-degradeable. On top of existing PLA performance, greatly improved the materials’ Fracture Toughness. Print much smoother. No warp or layer breaking problems. No brittle issue. Prints about 20 Celsius higher than regular PLA. Printing Parameters Best Printing Temperature：210-220℃ Bed Temperature：0/65℃ Printing Speed：30~90mm/s Movement Speed ：90~150mm/s Actual Diameter 2.85mm +/- 0.05mm Reinforced spool with bigger inner diameter to allow smoother pull from extruder, unlike most black spool on the market which has a tighter inner diameter. Non harmful, non-toxic, and environment friendly Low material shrinkage rate, uniform diameter +/- 0.05mm Greater selection of colors to choose from. Bio-Degradable Guaranteed Customer Satisfaction    

EPAX Fast PLA+ 3D Printer High Speed Filament, 1.75mm – INTSERVO 3D Printing Store

EPAX Fast PLA+ 3D Printer High Speed Filament, 1.75mm – INTSERVO 3D Printing Store

Clearance eSUN ePA (Nylon) Filament 1kg (2.2lb) Spool -2.85mm – INTSERVO 3D Printing Store

eSUN PLA+ Filament 2.85 mm 1kg (2.2lb) – INTSERVO 3D Printing Store

Clearance eSUN PVA Filament -Natural 1.75mm - 0.5kg Spool – INTSERVO 3D Printing Store

eSUN 3D 1.75mm PETG White Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque White : : Industrial & Scientific

eSUN 1.75mm TPU 95A Flexible 3D Printer Filament 1KG Spool (2.2lbs), Glass Yellow : Industrial & Scientific

eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm – INTSERVO 3D Printing Store

eSUN Water Soluble PVA Filament 1.75mm, 3D Printer Filament PVA, 0.5KG Spool 3D Printing Filament for 3D Printers, Natural : Industrial & Scientific

eSUN ePA (Nylon) Filament 1kg (2.2lb) Spool – INTSERVO 3D Printing Store

Clearance eSun Filament PLA+ 1.75mm 0.25kg spool- Cool White – INTSERVO 3D Printing Store

EPAX LCD Resin 3D Printers and Resins – EPAX 3D