Enhance Your 3D Printing With eSun PETG Filament. High-Strength PETG For Precise And Reliable Prints. Available At ThinkRobotics.
PETG is a high cost performance material with water resistance, chemical resistance and high toughness. It’s tougher than ABS; The printed product has translucent and smooth surface. It’s easy to print as PLA without temperature chamber.
Filament Properties Table | |
---|---|
3D PRINTING FILAMENT | PETG |
Density(g/cm3) | 1.27 |
Heat Distortion Temp(℃,0.45MPa) | 64 |
Melt Flow Index(g/10min) | 20(250℃/2.16kg) |
Tensile Strength(MPa) | 52.2 |
Elongation at Break(%) | 83 |
Flexural Strength(MPa) | 58.1 |
Flexural Modulus(MPa) | 1073 |
IZOD Impact Strength(kJ/㎡) | 4.7 |
Durability | 8/10 |
Printability | 9/10 |
Recommended printing parameters |
|
Extruder Temperature(℃) | 230 – 250℃ Recommended temperature:240℃ |
Bed temperature(℃) | 75 – 90°C |
Fan Speed | 100% |
Printing Speed | 40 – 100mm/s |
Heated Bed | Required |
Recommended Build Surfaces | Masking paper, PVP solid glue |
Feature | |
Flexible | —— |
Elastic | —— |
Impact Resistant | —— |
Soft | —— |
Composite | —— |
UV Resistant | —— |
Water Resistant | √ |
Dissolvable | —— |
Heat Resistant | —— |
Chemically Resistant | √ |
Fatigue Resistant | √ |
Need drying | —— |
Heated Bed Required | √ |
Print recommend | Drying at 65℃/>3h |
eSUN 3D 1.75mm PETG Blue Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Semi-Transparent Blue : Industrial & Scientific
eSun PETG – Bits4Bots
eSUN PETG Refill is a filament without a spool. The filament can be rolled onto a reusable spool and is compatible with eSUN's eSpool, This solution
eSun Refillable PETG Filament (1kg)
eSun PETG – Bits4Bots
PETG is a high cost performance material with water resistance, chemical resistance and high toughness. It’s tougher than ABS; The printed product has
eSun PETG Filament (1kg)
Best PETG Filament 2022 3D Printer PETG Materials eSUN3D
PETG is a fantastic material and has combined advantage of both PLA and ABS. This listing is for all 1.75mm PETG, For detailed spec, please refer
eSUN PETG Filament 1kg (2.2lb) Spool, 1.75mm
eSun PETG Filament - ThinkRobotics –
eSUN PETG Filament 1.75mm, 3D Printer Filament PETG, Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Solid Purple : Industrial & Scientific
eSun eSpool - Reusable Filament Holder - ThinkRobotics –
eSun PLA + Filament - ThinkRobotics –