The printing filament developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort; Description High impact resistance and good printability of PLA; Suitabl
The printing filament developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort;
Description
High impact resistance and good printability of PLA; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes it suitable for printing gears and can be used as temporary functional parts.
Sellingpoint
High rigidityHigh impact resistanceHigh wear resistanceExcellent printability
Filament Properties Table
3D PRINTING FILAMENT
ePLA-GF
Density(g/cm3)
1.31
Heat Distortion Temp(℃,0.45MPa)
565/10
Melt Flow Index(g/10min)
6.36(190℃/2.16kg)
Tensile Strength(MPa)
59.277/10
Elongation at Break(%)
7.991/10
Flexural Strength(MPa)
85.018/10
Flexural Modulus(MPa)
4414.898/10
IZOD Impact Strength(kJ/㎡)
10.162/10
Durability
4/10
Printability
9/10
Recommended printing parameters
Extruder Temperature(℃)
190 – 230℃Recommended temperature:215℃
Bed temperature(℃)
45 – 60°C
Fan Speed
100%
Printing Speed
40 – 100mm/s
Heated Bed
Optional
Recommended Build Surfaces
Masking paper, PVP solid glue, PEI
1. ePLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible
2. ePLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced
3. The blowing fan can be properly turned off to improve the model strength
eSUN ePLA-HS 1.75mm 3D Filament 1KG – eSUN Offical Store
eSun PLA+ vs PLA-HS (ex. PLA-HF) - high speed PLA testing
ePA-GF eSUN 3D printer Filament
Phaetus aeWorthy ABS-GF GLASS FILLED ABS (Multiple Colors) 3D Printer
eSUN ePA-GF glass fiber reinforced nylon filament
ePLA-GF Glass Fiber Reinforced PLA Filament eSUN 3D
ePA-GF eSUN 3D printer Filament
eSUN PLA+ review: Grab The Best Filament! - eSUN 3D Printing Materials
eSUN ePA-GF glass fiber reinforced nylon filament
PLA Series – eSUN Offical Store