Power over Ethernet - Wikipedia
Active PoE Splitter Adapter 48V to 12V IEEE 802.3af Compliant 10100
⭕ Functional Application: PoE extender comply with IEEE 802.3af Power over Ethernet. 10/100M Supported,Extend the range of PoE an additional 120
PoE Extender, 10/100Mbps, 15.4W Comply with IEEE 802.3af, POE Ethernet Switch Repeater, for Security Systems IP Camera Poe Splitter, IP Phone Network
POE injectors, POE splitters and POE transmitters over coax for IP cameras
V-Fiabilidad 2-Set PoE Combiner/Mux, POE Splitter Network Cabling Connector 3-Way RJ45 for Surveillance Camera Cables, PoE Synthesis Separation,Support IEEE802.3af/at Protocol, Max Transmission 130M : Electronics
POE Splitter 2-in-1 network cabling connector three-way RJ45 connector for security camera install
12V PoE Splitter Injector & PoE Switch Compatible
LINOVISION POE Splitter Power Over Ethernet with 2 DC 12V Output IEEE
Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender Combiner unit and a receiver Splitter unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done! Reduces cabling costs.
IPCamPower PoE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable